** Note, Using the Hemera on a Semi large CoreXY frame (500mm cube structure)
--- Using a 0.8 Micro Swiss coated nozzle
still tuning and setting up the slicing. I use Ideamaker so take what ya can from that. I'll show images of my slicer settings below-
A little PLA coat hanger and a TPU wire holder
Hemera Mounts for the Frown King (Anet E12)
New Endstop (better alignment)- More TPU wire management parts
Big Mystery panel!
And here's the slicer settings, again these aren't perfect yet, but working generally OK. getting a tad of "hump" in some corners X/Y and still just a tad of stringing (but it is a 0.8 nozzle not a 0.4 so ..)
